My Fixie is finally done !!

The frame is an old Raleigh I found in England. Used to be white with some rust shining through.

It was delivered with the original track fork (painted that one too), but I kind of chickened out with a fork drilled for brakes.

This modification gives a longer wheelbase, slacker HTA and STA but keeps about the same trail as the original setup despite the road-forks longer rake. The geometry is therefore pretty much the same as my road-bike, except for the bigger stand-over height.

It's build up with a various selection of components. Some would say it's blasphemy not going full campa, but truth is. This started out as a budget project and it's gone way too far already

I reckon most of you can tell the components from the pics except for the rims. They're NISI sprint. The tire bedding is actually drilled to shave off some weight.

Also. Take notice of the narrow rear spacing. Measured with my Mitutoyo digital caliper to be 112.3mm. Not many 110mm hubs available so I re-spaced the original 120mm hub down to 111.8mm. Gave it 0.5mm slack just to make it slide in a little easier ;-)

Pics are of course clickable